Lorenz Starlight Pro Скачать руководство пользователя страница 74

Страница: 74 / 108

User Manual

nominal range, the light of the Nav-Aid will start blinking.

'MENU' +

"MAP SETTINGS" +'ENTER' + "Dynamic Nav Aids" + 'ENTER'

Display Mode

To simplify the customization of the chart display, the map settings are now re-organized in modes

allowing the user to choose the preferred setting. Pre-programmed settings are user selectable from

Full, Medium, Low, Radar, Tides, Custom. The default setting is Custom.

'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Display Mode"

+ 'ENTER'

Distance (Track)

When the tracking function is On and the type of track storing is Distance, you can store a fix when the

distance from its last stored position is greater than a defined distance. Choose in the range 0.01, 0.05, 0.1,

0.5, 1.0, 2.0, 5.0, 10.0 Nm (the distance unit is selected by the user). The default setting is 0.01 Nm.

'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "DISTANCE" + 'ENTER'

Distance (Unit)

Sets the distance unit among Nm = nautical miles, Sm = status miles e Km = kilometers. The default

setting is Nm.

'MENU' +

"BASIC SETTINGS" + 'ENTER' + "DISTANCE" + 'ENTER'

DTG = Distance To Go

The actual distance to reach the Target.

EBL = Electronic Bearing Line

Dotted line with direction selectable by the user (see Par. 4.3).

Select Advanced Mode + 'ENTER' + "EBL & VRM" + 'ENTER'

Echosounder

AVAILABLE ONLY IF THE CHARTPLOTTER IS CONNECTED TO THE

VOICE NAVIGATION SYSTEM

Enables (On) or disables (Off) the Echosounder C-Voice mode. If it is On, the Depth message is spo-

ken. The message is spoken if a valid depth data is received by the chartplotter or if it is in Simulation

mode. The default setting is Off.

'MENU' +

"BASIC SETTINGS" + 'ENTER' + "C-VOICE" + 'ENTER' + "ECHOSOUNDER" + 'EN-

TER'

Event

User point that refers to the ship's position. It is simply a way of marking where the boat is (see Par.

4.2). An existing Event can be connected to the current route.

Inserting Event: 'CLEAR' + 'EVENT'

Deleting Event (Advanced Mode): Place cursor on Event + 'ENTER' + "DELETE" + 'ENTER'

Deleting Event (Basic Mode): Place cursor on Event + 'CLEAR'

Editing Event: Select Advanced Mode + Place cursor on Event+ 'ENTER' + "EDIT"+ 'ENTER' + Modify

Symbol, Name, Color + 'CLEAR'

Add to Route: Select Advanced Mode + Place cursor on Event+ 'ENTER' + "ADD TO ROUTE" + 'EN-

TER'

External Alarm

Allows triggering an external alarm device. You can enable (On) or disable (Off) the External Alarm.

The default setting is On.

'MENU' +

"ADVANCED SETTINGS" + 'ENTER' + "ALARMS" + 'ENTER' + "EXTERNAL ALARM"

+ 'ENTER'

External Waypoint

The coordinates of a Waypoint, received from a GPS or a LORAN connected to the chartplotter, can

be stored into the chartplotter, if the GPS or the Loran are NMEA-0183 protocol compatible and

support the $BWC sentence (this symbol remains on the screen for 30 seconds). You may save it by

placing a Waypoint or a Mark onto that symbol. As soon as the chartplotter receives another $BWC

Содержание Starlight Pro













































































































Результаты поиска

Содержание Starlight Pro

Отзывы:

Похожие инструкции для Starlight Pro

Бренды по названию

Популярные бренды

Lorenz Starlight Pro, Руководство пользователя

Результаты поиска

Содержание Starlight Pro

Отзывы:

Похожие инструкции для Starlight Pro

Бренды по названию

Популярные бренды