SOMMAIRE
E 8
LOREME
12, rue des Potiers d'Etain - 57071 Metz
03.87.76.32.51 - Fax 03.87.76.32.52 - Email: [email protected] - [email protected]
POWER UNIT?
Push the
(yes) button to access the power unit display mode setting.
AUTO(Y/N)?
Pressing
(yes) selects the automatic power unit mode (kMG unit prefix is automatic).
Pressing
(no) selects the fixed mode. kW, kVA, kVAR with 2 decimals are displayed for
the power measurements.
4.8) End of configuration
OK!
This message indicates that all the parameters have been successfully saved.
Remark:
If, during the configuration process, no buttons are pressed for more than 60 s, the device returns to measure mode
without saving the new configuration.
5) Setting or displaying the relays threshold
If the threshold detection is activated, pushing the
button accesses to the threshold setting or displaying. By default
the setting is allowed, but it is possible to lock it through the relay configuration by terminal mode (see
p11
).
The message ‘
THRESHOLD Rx?
’ (x = 1 or 2) scrolls on the display and the Rx led is on. Push the
(yes) button to
access to the setting or the
(no) button to go to the next threshold or to return to measure mode if it was relay 2.
If the setting is allowed, the
/
buttons permits to increase/decrease the threshold and the
button to save it.
Remark:
If during the setting, no buttons are pressed for more than 60 s, the device return automatically to measure mode with-
out taking into account the new settled threshold.
