3DM-GX5-45
™
GNSS-Aided Inertial Navigation System
DCP Manual
4.2.15
Device Startup Settings (0x0C, 0x30)
Description
Read, Save, Load, or Reset to Default the values for all device settings.
Possible function selector values:
0x02 – Read back current settings*
0x03 – Save current settings as startup settings**
0x04 – Load saved startup settings
0x05 – Reset to factory default settings
Notes
*
When a “read back current settings” command is issued, all settings reply fields from all
settings commands are returned. This is a substantial amount of data. Sending an idle
base command is recommended prior to issuing this command.
**
When a save current settings command is issued a brief data disturbance may occur as
all settings are written to non-volatile memory.
Field Format
Field Length
Field
Descriptor
Field Data
Command
0x02
0x30
U8 – Function selector
Reply:
ACK/ NACK
0x04
0xF1
U8 - echo the command byte
U8 - error code (0: ACK, non-zero: NACK)
Examples
MIP Packet Header
Command/Reply Fields
Checksum
Sync1
Sync2
Desc.
Set
Payload
Length
Field
Length
Field
Desc.
Field Data
MSB
LSB
Command:
Save All
0x75
0x65
0x0C
0x03
0x03
0x30
Fctn (Save): 0x03
0x1F
0x45
Reply:
ACK/NACK
0x75
0x65
0x0C
0x04
0x04
0xF1
Echo cmd: 0x30
Error code: 0x00
0x0F
0x0A
Copy-Paste version of the command: “7565 0C03 0330 031F 45”
67