3DM-GX5-45
™
GNSS-Aided Inertial Navigation System
DCP Manual
4.3.28
Tare Orientation (0x0D, 0x21)
Description
This function uses the current device orientation relative to the NED frame as the current
sensor to vehicle transformation.
This command is provided as a convenient way to set the sensor to vehicle frame trans-
formation.
Possible function selector values:
0x01 – Use new settings
0x03 – Save current settings as startup settings
0x04 – Load saved startup settings
0x05 – Reset to factory default settings
Possible axis bitfield values:
0x00 – Reset all axis
0x01 – Tare the roll axis
0x02 – Tare the pitch axis
0x04 – Tare the yaw axis
Example Combinations:
0x03 – Tare the roll and pitch axis
0x07 – Tare all 3 axis
Note: The filter must be initialized and have a valid attitude output. If the attitude is not
valid, an error will be returned.
Notes
The filter must be initialized and have a valid attitude output. If the attitude is not valid, an
error will be returned.
Field Format
Field Length
Field
Descriptor
Field Data
Command
0x04
0x21
U8 – Function Selector
U8 – Tare Axis Bitfield
Reply Field:
ACK/ NACK
0x04
0xF1
U8 - Echo the command descriptor
U8 - Error code (0: ACK, non-zero: NACK)
Example
MIP Packet Header
Command/Reply Fields
Checksum
Sync1
Sync2
Desc.
Set
Payload
Length
Field
Length
Field
Desc.
Field Data
MSB
LSB
Command
0x75
0x65
0x0D
0x04
0x04
0x21
Fctn (Apply): 0x01
X:Beta: 0x07
0x18
0x49
115