96
Figure: Installation of frame fixing rod
4. Horizontally place the bucket on the transportation vehicle, and then set the control
handle at the neutral position.
5. Pull the pilot joystick to the middle position.
6. Rotate the parking brake button to reset it.
7. Turn off the engine, set all switch at middle position or off position, and then pull out
the electric lock key.
8. Properly close and lock all doors, and then pull out the key.
9. Pull the negative pole switch of battery to the OFF position.
10. When using a truck or towing tractor to transport the loader, be sure to use chocks to
block up the wheels and use wire ropes to fix the loader, so as to prevent the loader from
moving in the course of transportation.
4.5.1 HOISTING OF LOADER
1. The hoisting operation shall be commanded and carried out by professionals who
have the hoisting-related knowledge.
2. Please calculate the maximum hoisting weight of crane and the loading capacity of
sling (the weight of loader is 11620±300 kg), so as to ensure the safety. In addition,
please ensure that the four hooks on the sling will be under even stress.
3. Before the hoisting operation, be sure to carry out the following preparation:
①
Set the control handle at the neutral position.
②
Place the lift arm and bucket at the lowest position, pull the pilot valve joystick to
the middle position.
③
Rotate the parking brake solenoid valve switch to reset it.
④
Shut down the engine and pull the key out from the electric lock.
⑤
Close and lock up all doors.
1. Pull the negative pole switch of battery to the off position.
