28
First, check ground conditions, water depth and
flow rate when operating on water or sandy
embankment. Do not exceed the allowable water
depth.
Do not drive or run the machine on the soft road,
otherwise, the machine may be difficult to leave.
Avoid operating on the cliff edge, suspended
material or deep pit, if the ground collapsed, the
machine crashed or upset, which may cause
serious casualties. Especially after raining, do
blasting operations or after earthquake, the soil is
very soft and sloppy and prone to cause danger.
Please install head protection devices for
operation on dangerous areas where there are
falling stones.
1.5.2 CHECK BEFORE ENGINE START-UP
Prior to operation, check the following items before the engine start-up. Otherwise, it may
cause serious injuries or damages.
Check whether there are leakages of fuel, oil or hydraulic oil.
The operator shall not leave parts and tools around seat, because those things may fall
and cause damage to joystick or switch due to the machine’s traveling and vibration
during operation, or it may lead to joystick moving or working devices running and cause
an accident.
Before ascending the machine, the operator shall remove all sludge and fine sand stuck
on the shoes, because the sludge may accumulate on the accelerator pedal and brake
pedal that will affect the reset of pedal. If these places accumulate sediment on the pedal,
you should remove it immediately.
