135
The maintenance under heavy dust or very hot environments
Clean the air filter more frequently.
Flush the surface of the heat radiator to remove the embedded dust and dirt.
More frequent replacement of fuel filter.
If necessary, inspect and clean up the starter motors and generators.
The maintenance for the operation in rocky environment,
Inspect the wheel and tire assembly to confirm whether there is any damages or excessive wear and
tear.
Inspect joints and fasteners to confirm they are loose or damaged.
More frequently inspect the bucket or breaker to confirm whether they are damaged or excessively
worn.
If necessary, install the anti-litter fence at the top and front of the windshield of the cab.
The maintenance of the operation under special cold area
Use the fuel which is compatible with the ambient temperature
Use the antifreeze which is compatible with the ambient temperature.
Confirm the battery's ambient temperature, as for the especial coldness, remove it at night, and store
it in a warm place.
Remove the slurry on the body timely, in order to prevent damaging the equipment due to freezing.
5.15 MAINTENANCE OF HYDRAULIC OIL
5.15.1 INSPECT THE OIL LEVEL OF THE HYDRAULIC OIL
Hydraulic oil tank is below the staircase on the left
of the frame. The round oil mark indicating the
level of the hydraulic oil is in the front of the
hydraulic oil tank.
When inspecting the oil level of the hydraulic oil,
park the car on a flat ground, put the bucket on
level ground, at this time, the hydraulic oil level
should reach the middle position of upper oil
mark.
