Logosol 912231020, Руководство пользователя

Страница: 11 / 56

Logosol Multifunctional Servo Drive LS-231g2SB
Doc # 712231006 / Rev. B, 12/26/2017
Logosol, Inc.
• • • •
2833 Junction Ave., Ste. 101
• • • •
San Jose, CA 95134
• • • •
Tel: (408) 744-0974
• • • •
www.logosolinc.com
11
CN3 – Auxiliary Interface
PIN SIGNAL DESCRIPTION
1 -A Encoder phase –A. Wired to CN2pin15
2 +A Encoder phase +A. Wired to CN2pin8
3 -B Encoder phase –B. Wired to CN2pin13
4 +B Encoder phase +B. Wired to CN2pin6
5 -Z Encoder phase –Z. Wired to CN2pin2
6 +Z Encoder phase +Z. Wired to CN2pin10
7 EXT +5V +5V power supply input. if power source jumper is installed
8 Gnd Power supply ground
9 Fault Fault output.
10 Gnd Power supply ground
11 +5V +5V Power Supply output
12 AEN Amplifier Enable input
13 NC Not connected
14 AnGnd Analog ground. Wired to CN4pin14
15 ADCin Analog input. Wired to CN4pin15
16 DACout Analog output. Wired to CN4pin16
CN4 – LS-231g2SB interface
PIN SIGNAL DESCRIPTION
1 DACout Analog output. Wired to CN3pin16
2 ADCin Analog input. Wired to CN3pin15
3 AnGnd Analog ground. Wired to CN3pin14
4 PhB Master encoder phase B output to LS-231g2SB
5 AEN/Z Amplifier Enable output
6 EXT +5V +5V input if power source jumper is installed
7 Gnd Power supply ground
8 Fault In Fault input from LS-231g2SB
9 Gnd Power supply ground
10 PhA Master encoder phase A output to LS-231g2SB
LS-2311 Power Supply Source
LS-231g2SB Master Encoder Cables
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
N.C.
To LS-2311 CN2
D-sub 15pin Female
GND
+ A
+ 5V
N.C.
+ Z
Reserved
+ 5V
- B
GND
- A
N.C.
+ B
Ua0(7)
Ua0(14)
Ua1(1)
Ua (9)
1
Up(4)
0V(2)
- Z
N.C.
Ua2(3)
Ua2(11)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Ua0
Ua0
Ua1
Ua 1
Up
0V
Ua2
Ua2
Sensor 0V
Sensor 5V
D-sub 15pin Female
To HEIDENHAIN Encoder
D-sub housing