QUICK START
Logicube ZXi-
10G™ User’s Manual
15
Details on the different screens
found in the Hash operation can
be found in
This mode will hash any connected drive on an active Master or Target port. This mode is Logical Block
Address (LBA) based and will hash drives based on the number of LBAs. If multiple drives are selected
to be hashed, the ZXi-10G will hash up to the LBA value of the smallest capacity drive. If drives with
different capacities need to be hashed, it is recommended to start one task per drive.
3.3.1 Step-By-Step Instructions
–
Hash
1.
Select
Hash
from the types of operation on the left side.
2.
Tap the
Target
icon and select the drive(s) to be hashed then tap the
OK
icon.
3.
Tap the
Settings
icon to choose the different settings. Details for every setting can be
found in
4.
Change any of the optional settings (LBA settings or percentage of the drive to be
hashed) if needed.
5.
Optional: Tap Job Info to set the Job Name, Job ID, Operator, Other ID, or Job Notes.
6.
Tap the
Start
icon to start the hash task.
7.
When finished,
the status will show “COMPLETED”. At this point, it is recommended to
tap
Reset Task
to reset the task, so the drive bays properly reset and do not show as
being used or assigned for other tasks. Click the
Info
icon on the bottom left of the
status to view the hash value. The hash value can also be seen in the log file (See
for more information on logs).
