QUICK START
Logicube ZXi-
10G™ User’s Manual
12
The drive will remain unlocked temporarily until the drive is
disconnected or powered down. If the drive is disconnected then
reconnected, it will be locked again. While the drive is unlocked,
a Secure Erase wipe will permanently remove the password lock.
3.1.2 Blank Disk Check
A blank disk check can be performed to see if a drive has been wiped by the ZXi-10G. This
check may not be accurate if Secure Erase was used to wipe the drive. To perform a blank disk
check:
1.
Connect a drive to the ZXi-10G.
2.
Go to Drives to see the list of connected drives.
3.
Tap the
More Info
icon to the right of the drive to display information about the drive.
4.
Tap or click the down arrow located to the right of the screen to scroll down to the
second page of information.
5.
Locate the line that shows “Wiped”. This will either show
True
(drive is blank) or
False
.
A drive that has just been wiped by the
ZXi-10G must be disconnected then
reconnected to refresh the drive details.
3.2 Clone
This type of operation allows the imaging of a Master drive to one or more Targets.
There are three different imaging modes and several settings to choose from. Drives
can be cloned using
Mirror
(bit-for-bit copy) or
Clever
(copies only data areas, skips
blank sectors, and partitions can be resized to fit larger capacity drives).
Details on the different screens
found in the Imaging operation can
be found in
