TYPES OF OPERATIONS
Logicube SuperSonix-
NG™ User’s Manual
65
•
Network Settings
–
This entire section cannot
be accessed without the Config Lock unlock key.
•
Software Updates
–
This entire section cannot
be accessed without the Config Lock unlock key.
•
Power Off
–
This entire section cannot be
accessed without the Config Lock unlock key.
The unit can still be turned off
without the unlock key by
using the power button located
on the front of the unit.
5.8.2.1.2 Forgotten password for any keys
If any of the keys is forgotten, the INITIAL.DB profile will
need to be loaded using the Command Line Interface
(CLI). See
for more information on how to
connect using the CLI.
This method will only work if the
INITIAL.DB profile does not have a
Config Lock Key saved. If the INITIAL.DB
has a Config Lock Key configured, and
the password was forgotten, contact
Tech Support assistance.
Once connected to the Command Line Interface (CLI):
1.
Login with the username “
it
” (without the
quotes) and the password “
it
” (without the
quotes).
2.
From the main prompt, type
command,
then
press the enter key.
3.
Type
config
then press the enter key.
4.
Type
db list
then press the enter key. This will
show a list of profiles (or databases) saved. The
unit has one default profile called
initial.db
. Any
profiles added by users will appear in this list.
The example below shows two databases (the
default initial.db and lock.db). The db that shows
an asterisk (*) before the name is the current
database or configuration being loaded each
time the unit is turned on.
5.
Type
db
load initial.db
then press the Enter key
to load the default database. There should be a
