Logicube, Inc. SuperSonix-NG, Руководство пользователя

Страница: 72 / 97

TYPES OF OPERATIONS
Logicube SuperSonix-
NG™ User’s Manual
64
Remember the Config Lock Key! If the unit is configured
to load a user profile with the Config Lock set (enabled)
and the password is forgotten, the only way to reset the
Config Lock is load the INITIAL.DB profile using the
Command Line Interface. See
Section 5.8.2.1.2 for more
information.
If the INITIAL.DB has a Config Lock Key configured, and the
password was forgotten, contact Tech Support assistance.
5.8.2.1.1 Config Lock Notes
A shortcut (and indicator) to the config lock can always
be seen on the top-right of the screen next to the logo.
or
While in a locked state, the following operations will be
affected as follows:
•
Cloning – An imaging task can be started, but
no settings can be changed. Additionally, no
new task can be added, and no task can be
deleted without the Config Lock unlock key.
•
Hash – A hash task can be started, but no
settings can be changed. Additionally, no new
task can be added, and no task can be deleted
without the Config Lock unlock key.
•
Wipe / Format – A wipe / format task can be
started, but no settings can be changed.
Additionally, no new task can be added, and no
task can be deleted without the Config Lock
unlock key.
•
Task Macro –
A task macro can be started, but
no settings can be changed. Additionally, no
new macro can be set or edited without the
Config Lock unlock key
.
•
Logs – Logs are not affected by Config Lock.
• Statistics – Since there are no settings or
configurations for this operation, it is not
affected by Config Lock.
•
Manage Repositories – A managed repository
cannot be added, edited, or deleted without the
Config Lock unlock key.
•
System Settings – This entire section cannot be
accessed without the Config Lock unlock key.