GETTING STARTED
Logicube SuperSonix-
NG™ User’s Manual
8
2.1 Turning the SuperSonix-NG on and off
A 12V grounded, 12.5A (output DC) power supply that connects to the back of the unit is included. Attach
the power supply to the DC power port located in the back of the unit.
To turn the unit on, press and immediately release the power button located on the top right corner of
the unit.
It is normal for the fans to either turn off or
slow down after the initial start-up sequence.
There are two ways of turning the unit off:
1.
Press and immediately release the power button on the top right corner of the unit. The unit will
begin its shut down process and after a few seconds, the display and fans will turn off.
2.
Using the Graphical User Interface (GUI) either on the touch screen or via a browser through a
remote connection, navigate to the
Power Off
screen and tap or click the
Power Off
icon.
2.2 Connecting various drive types
Cables and adapters are available for the following drive types:
•
SATA
•
USB
•
2.5” and 3.5” PATA/IDE
•
FireWire (FireWire support is available with the activation of a software option)
•
SAS (SAS support is available with the activation of a software option)
•
1.8” micro SATA (optional)
•
1.8” ZIF (optional)
•
1.8” PATA/IDE (optional)
•
eSATA (optional)
•
mSATA (optional)
•
Flash Media (optional)
•
M.2 NVMe or AHCI (optional for use with the F-SUPERSONIX-NG-P)
•
M.2 SATA (optional)
•
mPCIe (optional for use with the F-SUPERSONIX-NG-P)
•
PCIe HHHL
2.2.1 Connecting Master Drives
Master drives must be connected to the left side of the unit. These ports are write-
protected and are labeled as follows:
