TYPES OF OPERATIONS
Logicube SuperSonix-
NG™ User’s Manual
47
5.2.3 Job Info
The Job Info setting allows users to enter some information about the job. Job Info is not
required to start a Clone, Hash, or Wipe/Format operation.
Information entered here will appear in the logs. More information on the Job Info screen
can be found in
5.3 Wipe / Format
This type of operation allows the user to erase, wipe, and/or format one or more Target
drives. There are three main settings: Secure Erase, Wipe Patterns, and Format.
•
Secure Erase
–
Sends a command to the drive instructing it to perform a secure erase based on
the drive manufacturer’s specifications for the secure erase command.
•
Wipe Patterns
–
Allows the user to set a specific pattern to use for wiping the drive. The number
of passes is customizable (up to 7 passes) along with the type of data written for each pass. In
addition, a 7-pass DoD wipe can be set with pre-selected pass values.
•
Format
–
Formats the Destination drive with one of the following user selectable file systems
(with or without encryption): EXT4, NTFS, exFAT, FAT32.
There are three selections when performing a wipe:
•
Destination
•
Settings
