ACS-CB-SENS - MANUAL // PAGE 16
6.7 CONNECTING THE ACS-CB-SENS TO THE
CONTROL BOX
NOTICE
To avoid strain on Cables, ensure the ACS-CB-SENS is mounted a suitable distance from
the Control Box.
1. Ensure the Control Box is not connected to the power source.
2. Insert the round DIN connector of the LOG-CBL-CB-SENS into the ACS-CB-SENS (Fig. 6).
3. Insert the cranked, 8-pin cable into the Port on the top of the Control Box (Fig. 7).
4. Reconnect the Control Box to the power source.
Fig. 6:
Connecting the LOG-CBL-CB-SENS to the ACS-CB-SENS and Control Box
Fig. 7:
Connecting the LOG-CBL-CB-SENS to the Control Box
7 SYSTEM INFORMATION
ISP Activated
Release all Keys and wait for the Drive Back function to
be completed.
Collision Sensor Defective
Perform a Factory Reset. Contact LOGICDATA if the
problem persists.
Cranked Connector
Round Connector
