12A
-
5
FUEL MIXTURE
Specifications
K7M, and 710
12A
Manifold pressure sensor
SIEMENS 5WK9681
Piezo-resistive sensor
3-track connector:
- A: earth
- B: signal
- C: + 5 V supply
Injection order
1, 3, 4, 2 (number 1 flywheel end)
Fault finding
Diagnostic tool
CLIP only
Throttle potentiometer
CTS
3-track connector:
- A: earth
- B: + 5 V supply
- C: signal
Track resistance: 1200
±±±±
240
Ω
Pinking sensor
JCAE
Piezoelectric type sensor
Tightening torque: 20 Nm
Engine speed and position
sensor
SIEMENS
Integrated connector
Resistance: 200 to 270
Ω
Upstream oxygen sensor
NTK 6 L
The sensor heating is interrupted when the exhaust
gas temperature rises above 650˚C.
Heating resistor : 3.3
Ω
at 20˚C
4-track connector
- A: heating resistor supply
- B: heating resistor earth
- C: + signal
- D: - signal
Warm engine:
- Rich mixture >850 mV
- Lean mixture <100 mV
Description
Brand - Type
Special notes
Содержание X90
