19A
-
12
COOLING SYSTEM
Cooling radiator
K7J or K7M, and 710, and BASIC HEATING
19A
REMOVAL
Mount the vehicle on a lift.
Remove the engine undertray.
Drain the cooling circuit via the lower radiator hose
using tool (Mot. 1202-01) or (Mot. 1448) (see 19A,
Cooling, Draining - Filling the cooling circuit).
Remove the power assisted steering fluid reservoir
from its mountings (without opening the circuit),
Attach the power assisted steering fluid reservoir to
the engine.
Remove bracket (1) for the power assisted steering
fluid reservoir.
Disconnect:
- the upper radiator hose using tool (Mot. 1202-01) or
(Mot. 1448),
- fan assembly connector (2).
Remove radiator mounting bolts (3) through the ra-
diator grille (without removing the bumper).
Remove the radiator.
Essential special tooling
Mot. 1202-01
Clip pliers for cooling
system hose clips
(large model)
Mot. 1448
Remote operation
pliers for cooling sys-
tem hose clips
DIRECTION ASSISTEE
109396
1
109398
108430
2
3
Содержание X90
