72
To set an alarm, press briefly the knob three times until the icon “TIMER” stars flashing.
Then turn the knob, the timer programming is identical to the end cooking time program (see the
relevant paragraph)
The timer can be used only when there is no ongoing function.
DISPLAY OF THE SELECTED PROGRAM
To display the selected program briefly press the knob, at the same time the programmer
displays the program moving the hands on the selected time. The flashing of the relevant icons
indicates the different phases.
The programmer will then return automatically to display the current time and the execution of
the selected program.
DELETION OF THE SELECTED PROGRAM
To delete the selected program, push the knob for some seconds until you hear a beep and the
relevant icons are off.
The programmer will then return automatically to the manual cooking mode.
BLACKOUT SIGNAL
The timer does not cancel the program in case of blackout.
The timer signals any lack of power supply through the flashing of the “CLOCK” icon, in order to
verify that the time is set correctly.
In this case, to disable the alarm quickly press the knob.
TIMER TOUCH CONTROL
Setting the clock
Figure 1
“Auto” and “0:00” will start flashing when the unit is switched on for the first time. To set the
clock, press the central button for about 3 seconds.
When
appears, press “+” or “-“ to set the correct time.
Wait until a beep tells you that the clock has been set (figure 1).
To set the time at a later stage, press “+” and “-” together for 3 seconds and then adjust the
clock as described above.
