Loewe Individual 40 Selection, Руководство пользователя

Страница: 23 / 152

Connect 32 DR+ - Connect 55
User manual
23
„
Initial installation
Setting options for DVB-S reception:
If you have not selected Satellite (DVB-S/cable x) in step Connect
antenna cable(s) in the initial installation, proceed to the next section
Setting options for all types of reception .
Select network.
If several networks are available via DVB-S, you can
decide which network you want to receive your
channels from.
Proceed to next step.
Selecting the satellite system.
Specify how you receive which satellite(s) (single
satellite or type of satellite system). Ask your
dealer in this regard.
The normal DVB-S settings are derived from the
selection of the location and do not need to be
changed in most cases.
Single
satellite
Reception of a single satellite via a connected LNC
(LNB).
2 satellites
on 22 kHz
switchbox
Reception of two different satellites with two LNCs
(LNBs) which are connected to the TV set by a 22
kHz switchbox.
2 satellites
on toneburst
switch
Reception of two different satellites with two LNCs
(LNBs) which are connected to the TV set by a
toneburst switch.
Max. 4
satellites
on DiSEqC
multiswitch
The TV set controls a DiSEqC multiswitch to which
up to four LNCs (LNBs) for different satellites are
connected.
DiSEqC
one cable
communal
system
Select setting if the TV set is connected to a DiSEqC
single-cable system (according to EN 50494). Several
Sat receivers can be connected to one Sat cable.
Network
selection
Please state from which network you wish to receive your station.
Note: The newly selected parameter must be confirmed with the button.
ASTRA LCN
Standard
Network selection (DVB-S)
Back with Proceed with
OK
Please define which satellites you receive or which satellite equipment you use.
Select satellite installation
Indietro con Avanti con
Single satellite
2 satellites on 22 kHz switchbox
2 satellites on toneburst switch
Max. 4 satellites on DiSEqC multiswitch
DiSEqC one cable communal system
Other communal installation
Select
satellite
installation
other
communal
installation
Select setting if the TV set is connected to a
single-cable system (without DiSEqC). Several
Sat receivers can be connected to one Sat cable.
Contrary to a DiSEqC one cable communal system
there are restrictions in the range of certain reception
frequencies in "common" single-cable community
systems.
Proceed to next step.
The rest of the initial installation wizard routine
depends on the selected satellite system in step
Select
satellite installation .
The different satellite systems are described in the
following sections of initial installation.