6
1.3
For Your Safety
For safe and successful operation of the unit, read these instructions completely.
If the instructions are not observed, the manufacturer can assume no responsibility.
Damage to the power cord or the housing can result in contact with voltage carrying parts that
is dangerous to life.
●
Check the power cord and the unit before each use.
If the power cord or the unit is damaged, do not operate!
Replace a damaged power cord with a new one.
●
The unit may be opened and repaired only by an authorized Henkel service representative.
If Loctite
®
brand products are not properly handled, damage to health can result!
●
Observe general safety regulations for the handling of chemicals!
●
Observe manufacturer’s instructions! Request a safety data sheet for the product used!
●
Always wear goggles, when operating with pressurized air!
1.4
Usage
The Loctite
®
Digital Syringe Dispenser (97006) is suitable for the exact application of Loctite
®
brand
products at manual workstations such as in workshops, laboratories and industrial installations.
It is a self-contained dispenser system.
The Loctite
®
Digital Syringe Dispenser (97006) is designed for a product application position and for
small quantities.
With the Loctite
®
Digital Syringe Dispenser (97006), Loctite
®
brand anaerobic, UV curing and gel
cyanoacrylate adhesives as well as Loctite
®
brand chipbonder
®
adhesives and soldering flux can
be dispensed.
Please observe the following
1
