SECTION 3.1
7
3.1 Configuring Access
How to Use the Keypad
There are a total of
five (5) buttons
on the keypad as
shown in the example image to the left. The numbers
in each button may differ than what is shown on your
device than what is displayed here.
To enter your required digit, just simply press the circle
where your number is shown. You do not need to
press the actual number as anywhere within the circle
will suffice.
The button on the bottom is the
OK
button. You will be
pressing this button when you are done entering your
Access Code.
Your new Lockly Guard
Access Code
can be any combination of
6 to 8 digits.
Once a new
Access Code
is entered, the
Default Access Code
of
123456
would be
deleted.
Lockly Guard Defender can support up to 1033 sets of Access Codes. It comes with
60 access codes for free. To add more access codes, subscription to Lockly\OS is
required. To subscribe, send an email to [email protected] or visit:
www.locklyOS.com to learn more.
OK Button
The Default Access Code is
1 2 3 4 5 6
NOTICE
