SECTION 4.7
23
4.8 Rain Mode
Like other digital electronic products water can trigger to activate the touchscreen
and fingerprint sensor which may cause the batteries to drain. To protect the lock
and extend battery life, you can setup your Lockly Guard to enter Rain Mode to shut
off keypad and fingerprint reader whenever rain or water is detected.
Activate this feature on the LocklyPro app. While you are within the Bluetooth range
or remotely connected thru Wi-Fi hub (Secure Link), go to
Settings > Rain Mode
and
toggle the button to turn ON.
When RAIN MODE is ON, the keypad,
fingerprint sensor and RFID reader cannot
be used. Unlock via LocklyPro App, or
physical key. Rain Mode auto exits every
30-mins and re-enters if water or rain is
still present.
If you are using the LocklyPro app, you
will be notified when Lockly Guard entered
rain mode and it will be recorded in
your access history.
IMPORTANT
If you have not yet connected your device to LocklyPro
App, follow below steps to activate the rain mode
feature:
RAIN MODE ON
1. Long press to enter fixed
digit keypad.
2. Enter
access code +234+
.
3. You will hear a short beep and
Bluetooth indicator flashes green
once Rain Mode is ON.
example: 234 +
RAIN MODE OFF
1. Long press to enter fixed
digit keypad.
2. Enter
access code +890+
.
3. You will hear a long beep and
Bluetooth indicator flashes green
once Rain Mode is OFF.
example: 890 +
