12
SECTION 3.7
Fingerprints can only be added or deleted
through the App. On the App Access
Management, select Fingerprint, then tap
"Add New Fingerprint"
.
Scan your finger by lightly placing your
designated finger on the sensor until you
hear a beep. Lift your finger and repeat the
process until the digit “6” shown on the
screen becomes “1”. If you have success-
fully scanned and registered your finger-
print, you will hear a beep and PASS will be
displayed on the keypad. Press to exit.
If you did not successfully register your
fingerprint, FAIL will show on the keypad. If
FAIL is displayed, return to the previous App
menu and rescan your finger.
For fingerprint scanning directions, please
refer to
Section 3.8.
3.7 Adding/Deleting Fingerprints
IMPORTANT
Please make sure your fingers are
clean from dirt and oils before
scanning your fingerprint. Make
sure the sensor is also clean by
taking a soft cloth and wiping
the surface.
To
delete fingerprint access
, on the App Access Management, select Fingerprint. All
registered fingerprint profiles will be shown. Scroll down, select the tap the profile you wish to
delete. Check and then tap
"Delete User"
to confirm and complete deleting the
fingerprint.
