Lock Inspection Systems MET 30+ Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 61

Lock Inspection Systems MET 30+ Скачать руководство пользователя страница 7

Doc. Ref.No: Q875-0143/ENG

Issue 2

Met 30+ Operating Manual

12/01/10

1. GENERAL

The instructions given in this manual have been written clearly and briefly to enable
an easy understanding of the actions necessary to operate this equipment.

In order to ensure trouble-free and reliable service it is strongly recommended that
operators of the equipment are provided with this manual in order to familiarise
themselves with the controls and procedures.

2. HEALTH AND SAFETY

2.1 Health and Safety at Work etc. Act

The Purchaser shall comply with the instructions and information of this manual, and
it is strongly advised that all personnel associated with this equipment be made
familiar with the information contained herein.

It is essential that the personnel engaged on the operation of the plant be competent
and experienced in the work, and that they comply with the statutory requirements
and regulations, including the provisions of the Health and Safety at Work Act, and
any amendments that may become legal requirements.

Note: For installation of the

MET 30+, 1f, 3f

range of metal detectors refer to the

Installation Manual.

File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc

Page 5 of 58

«
...
5
6
7
8
9
...
»

Содержание MET 30+






























































Отзывы:

Нет отзывов