Lock Inspection Systems MET 30+ Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 61

Lock Inspection Systems MET 30+ Скачать руководство пользователя страница 44

Doc. Ref.No: Q875-0143/ENG

Issue 2

Met 30+ Operating Manual

12/01/10

8.2.4 Fault

Reports

8.2.4.1 Balance Fault

The detector has failed to balance the head - call Lock Inspection.

Format: {time-stamp} Fault - BALANCE FAULT

8.2.4.2 Photocell Error

One of the photocells has been blocked for a longer time than specified in the
blocked photocell delay (set from the engineer's menu). Remove the blockage or
increase the photocell delay.

Format: {time-stamp} Fault - PHOTOCELL ERROR

8.2.4.3 Reject System Failed

The reject check is enabled and the reject system has failed to operate. Check the
reject system.

Format: {time-stamp} Fault - REJECT SYSTEM FAIL

8.2.4.4 No Reject into Bin

Note: This feature is only applicable to conveyorised systems.

The system reject check is enabled and the photocell has not detected a product
entering the reject bin within the delay specified.

Format: {time-stamp} Fault - NO REJECT INTO BIN

8.2.4.5 Auxiliary Input Failed

Note: Not used on the Pharmaceutical detector.

The auxiliary input has been activated. This can have several uses and results in
one of the following messages:

Format: {time-stamp} Fault - AUXILIARY INPUT FAIL

Format: {time-stamp} Fault - AIR FAILURE

Format: {time-stamp} Fault – BLOCKAGE

Format: {time-stamp} Fault - FLAP FAULT

Format: {time-stamp} Fault - BIN FULL

File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc

Page 42 of 58

«
...
42
43
44
45
46
...
»

Содержание MET 30+






























































Отзывы:

Нет отзывов