Lock Inspection Systems MET 30+ Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 61

Lock Inspection Systems MET 30+ Скачать руководство пользователя страница 27

Doc. Ref.No: Q875-0143/ENG

Issue 2

Met 30+ Operating Manual

12/01/10

5.4.7.6 Switch Frequency (F) : Menu only available on 3f

Switch frequency

Low

The frequency can be changed to Low, Medium and High using the / keys.

5.4.7.7 Exit (x) :

Selecting the 'x' option returns to the supervisor menu.

5.4.8 Delete Product (D) :

On entering this option you will be asked which product setup to erase:

Erase product: 1
PILLS

The / keys scroll through the list of products that can be deleted. Note that the
TEST SETUP cannot be deleted.

When the product to be deleted has been chosen, press SELECT. Confirmation will
be asked for. If "NO" is selected then no action is taken and the option is exited. If
the current product is deleted the detector will switch to running the TEST SETUP.

5.4.9 Operator's Code (o)

This allows the operator's access code to be changed, the and keys select each
number and the SELECT key sets it. The new code will over-write the old one.

5.4.10 Engineering Setup (e) :

Can only be entered by using the Engineer security code.

5.4.11 Exit (x) :

Exit the Supervisor menu and returns to the Bargraph.

5.5 Engineers Menu

When the engineer's code is entered the supervisor menu is displayed. All options
are available except the Lock Engineer. Selecting 'e' enters the menu.

ScvTCPselx

Engineering displays

File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc

Page 25 of 58

«
...
25
26
27
28
29
...
»

Содержание MET 30+






























































Отзывы:

Нет отзывов