manualshive.com logo in svg

Lock Inspection Systems MET 30+, Руководство по эксплуатации, Страница: 22 / 61

Поделиться
Скачать
Lock Inspection Systems MET 30+ Скачать руководство пользователя страница 22

Doc. Ref.No: Q875-0143/ENG

 

Issue 2 

Met 30+ Operating Manual

 

12/01/10 

 

Entering the supervisor code allows access to supervisor functions in addition to 
operator functions and so on. If any of the four security codes have the same value, 
then the software will allow access in line with the highest level security code. For 
example, if the supervisor and engineer codes were the same then entering this 
code would allow access to the engineering options (as well as the supervisor 
options). 
 
The security code will remain active for a set time after the last key press. 
 

5.3 Operator 

Menu 

The lowest level menu looks like: 
 

 Test 

Product 

Print Exit 

 
Use the   and   key's to select an option shown by the first letter flashing then the 
SELECT key to select it. 

5.3.1 Test 

This option allows a test of the metal detection sensitivity to be done. Firstly the 
software asks for a PIN (personal identification number): 
 

Enter PIN number: 

1234 

 
After the PIN is entered the user has nine seconds to pass the metal sample. If the 
detector fails to detect metal in this time it displays the message "TEST FAILED", 
and waits for the SELECT key to be pressed and returns to the TEST menu. If metal 
has been detected then "TEST PASSED" is displayed and waits for the SELECT key 
to be pressed before returning to the TEST menu.  

5.3.2 Product 

This menu item allows different product setups to be chosen. On selecting this menu 
item a product name and number are displayed. The  /  keys may be used to scroll 
through the list of available products. When the desired product is displayed press 
SELECT to set up the metal detector for that product. 
 

5.3.3 Print 

This menu allows you to send a report to the serial port for printing if the 'Print on 
demand' option has been set in the engineering option. If 'Print on event' has been 
selected the report is sent to the serial port as soon as the test has been done. If the 
'Print' option is selected when 'Print on event' is used then 'Printing on event’ is 
displayed and it waits for the SELECT key before returning to the menu. To return to 
the bargraph the SELECT and   keys must be pressed. When the 'Print on demand' 

File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc 

Page 20 of 58

 

Содержание MET 30+






























































Отзывы:

Нет отзывов