ⱥㄒ㸭(1*/,6+
3
$
%
0
1
.
:
7
<
8
2
/
=
Ў
Ў
N
CAUTION
࣭
Wear protective goggles or safety glasses.
࣭
When this product is damaged, please do not use.
20. This product is an exclusive tool for Blind Rivet fastening two boards by riveting.
We do not design, manufacture or sell intending to other applications.
21. For the maintenance of the main body, for every 30,000 installation of the fastener or
in one year.
22. Only qualified and trained operators should install, adjust or use the assembly power
tool for non-threaded mechanical fasteners.
23. Slips, trips and falls are major causes of workplace injury. Be aware of slippery surfaces
caused by use of the tool and also of trip hazards caused by the air line or hydraulic
hose.
24. Proceed with care in unfamiliar surroundings. There can be hidden hazards, such as
electricity or other utility lines.
25. This assembly power tool is not intended for use in potentially explosive atmospheres.
26. This assembly power tool is not insulated against contact with electric power.
27. Ensure that there are no electrical cables, gas pipes, etc.,which can cause a hazard if
damaged by use of the tool.
28. If you experience numbness, tingling, pain or whitening of the skin in your fingers or
hands, stop using the assembly power tool, tell your employer and consult a physician.
29. Air under pressure can cause severe injury.
30. Always check for damaged or loose hoses and fittings.
33. The regular preventative maintenance shall be carried out, for instance after a specilfied
time of operation, a specified number of cycles/operations or a stated number of times
per year.
34. When you handle hydraulic oil or grease, obtain the Safety Data Sheet (SDS) from the
supplier, and follow the described instructions.
35. When disposing this tool, please follow the regulations and the rules of the country and
autonomous community.
19. This product is a tool for exclusive use of the professional business. When you are
the one who uses this tools for the first time, please receive an instruction from the
one who have already used this tools before, also please read the Instruction Manual
carefully and understand the content.
18. The production date of this product is shown brevity code below the tools.(on page5)
How to check manufactured date
An English character
(Example) year: 2 0 1 4 month: 8
Ѝ
N Y
A year/month of manufacture
࣭
You may fall down and injury may result.
࣭
Whipping hoses can cause severe injury.
31. Handle this product in a careful manner.
࣭
Rough handling may cause an accident and failure of the tool. Do not throw, drop, nor give
shock to this product.
32. Do not carry nor trail this product by pulling a joint hose.
࣭
It may cause a damage to the hose, a failure and an abnormal action of this product.
Then, an accident and injury may result.
࣭
Always shut off air supply, drain hose of air pressure and disconnect tool from air supply when
not in use, before changing accessories or when making repairs.
࣭
Never direct air at yourself or anyone else.
Y
