ⱥㄒ㸭(1*/,6+
10
Replacement of the Nosepiece
1
2
Turn off air supply.
Remove the Nosepiece from the Frame
Head ‘CJM’ using a wrench or spanner.
DISASSEMBLY
3
Firmly set a Nosepiece applicable to the rivet size to the Frame Head ‘CJM’.
RE-ASSEMBLY
Frame Head ‘CJM’
(AF 22mm)
Nosepiece
(AF 10mm)
Replacement of the Tank Case Sponge
1
2
Turn off air supply.
Remove the Tank Case Unit by turning it in a counterclockwise direction.
3
Remove the Tank Case Sponge in the direction of the arrow.
DISASSEMBLY
4
Assemble the tank case sponge and Tank Case Unit in reverse order of disassembly.
RE-ASSEMBL
Y
Tank Case Unit
Tank Case Sponge
Cross-section view
of Tank Case Unit
ձ
ղ
ە
Before starting maintenance or disassembling the unit to replace parts, be sure to stop air
supply.
Performing maintenance or disassembly with air supplied may cause a part to jump out, oil to squirt
out, or the unit to perform unexpected behavior, and may result in an accident or personal injury.
CAUTION
ە
Before starting maintenance or disassembling the unit to replace parts, be sure to stop
air supply.
Performing maintenance or disassembly with air supplied may cause a part to jump out, oil to squirt
out, or the unit to perform unexpected behavior, and may result in an accident or personal injury.
CAUTION
ە
If the Nosepiece is damaged, replace it with a new one.
ە
If you change the rivet size, replace with an applicable Nosepiece.
Note
ە
If power of vacuuming rivets becomes lower or the tank case sponge is damaged, replace with
a new tank case sponge.
Note
ە
Please check periodically whether there is any slack of a nosepiece during work.
ە
If you work after the nosepiece is loosened, damage to the parts may occur.
Note
ە
Tank case sponge is a consumable item. Replace it on a regular base.
Note
