O-ring
Rotary joint
unit
7
䠍
ᾀ
ᵧᶌᶑᶒᵿᶊᶊᴾᶒᶆᶃᴾᶒᵿᶌᶉᴾᶓᶌᶇᶒᴾᶒᶍᴾᶒᶆᶃᴾᶒᶍᶍᶊᵌ
䠍
ᾁ
ᒍᛖᾔ
ᾝ
ᾖ
ᾛᾘ
ᾢ
ᾗ
⁂⁄‷⁂″⁄″⁆※⁁⁀‒‴‷‸⁁⁄‷‒⁇⁅‷
ᵰᶃᶋᶍᶔᶃᴾᶒᶆᶃᴾᶂᶓᶑᶒᵋᶎᶐᶍᶍᶄᴾᶁᵿᶎᴾᶍᶌᴾᶒᶆᶃᴾᶀᶍᶒᶒᶍᶋᴾᶍᶄ
ᶒᶆᶃᴾᶒᶍᶍᶊᵊᴾᵿᶌᶂᴾᶒᶆᶃᶌᴾᶁᶍᶌᶌᶃᶁᶒᴾᶒᶆᶃᴾᶐᶍᶒᵿᶐᶗᴾᶈᶍᶇᶌᶒᴾᶓᶌᶇᶒᵌ
Connect the end of the rotary joint unit which has the
O-ring fi tted to the tool.
⚠
ᵵᵟᵰᵬᵧᵬᵥᵓᵆᵮᵌᵐᵇ
ᵟᵲᵲᵣᵬᵲᵧᵭᵬᵘ
If the air pressure is too high, damage to parts may occur. If the pressure is too low,
㻌㻌
some size of the rivet may not be correctly installed (cut)
.
䠍
ᾃ
ᵳᶑᶃᴾᶒᶆᶃᴾᵿᶇᶐᴾᶐᶃᶅᶓᶊᵿᶒᶍᶐᴾᶒᶍᴾᵿᶂᶈᶓᶑᶒᴾᶒᶆᶃᴾᶍᶎᶃᶐᵿᶒᶇᶌᶅᴾᵿᶇᶐᴾᶎᶐᶃᶑᶑᶓᶐᶃᴾᶒᶍᴾᵎᵌᵓ ῍ ᵎᵌᵔᴾᵫᵮᵿᴾ
ίᵕᵏ ῍ ᵖᵓᴾᶎᶑᶇὸώ
If installing stainless steel rivets with a diameter of 4.8 mm (3/16’’) with the AR2000MV
(A)
,
set the air pressure to 0.55
䡚
0.6 MPa (78
䡚
85 psi).
⚠
ᵵᵟᵰᵬᵧᵬᵥᵏᵆᵮᵌᵐᵇ
Tank unit
Air controller
Fit the tank unit onto the air controller securely as
shown in the illustration.
⚠
ᵵᵟᵰᵬᵧᵬᵥᵑᵆᵮᵌᵐᵇ
䠍
ᾂ
ᵱᶃᶒᴾᶓᶎᴾᶒᶆᶃᴾᶁᶍᶋᶎᶐᶃᶑᶑᶍᶐᵊᴾᵿᶌᶂᴾᶀᶃᴾᶑᶓᶐᶃᴾᶒᶍᴾᶇᶌᶑᶒᵿᶊᶊᴾᵿᶌᴾᴾ
ᵿᶇᶐᴾᶄᶇᶊᶒᶃᶐᵊᴾᵿᶇᶐᴾᶐᶃᶅᶓᶊᵿᶒᶍᶐᴾᵿᶌᶂᴾᵿᶇᶐᴾᶊᶓᶀᶐᶇᶁᵿᶒᶍᶐᴾᵆᵑᵋᶂᶃᶔᶇᶁᶃᴾ
ᶑᶃᶒᵇᴾᶀᶃᶒᶕᶃᶃᶌᴾᶒᶆᶃᴾᶁᶍᶋᶎᶐᶃᶑᶑᶍᶐᴾᵿᶌᶂᴾᶒᶆᶃᴾᶒᶍᶍᶊᵌ
Air regulator
Air fi lter
Air
lubricator
Adjust the drip-feed amount of the air lubricator to
the minimum setting.
ᵟᵲᵲᵣᵬᵲᵧᵭᵬᵘ
In case of the usage in the cold district,
the moisture laden air in the tool body
may be frozen on the inside cylinder
surface. As the result, it may not work.
To dehydrate, we recommend to add the
air-dryer unit to the normal three units
(Regulator, Filter, and Lubricator).
Push
Table etc.
Nosepiece
Tank unit can easily be fi tted onto the air controller
by pushing the nosepiece against the table as
shown right.
