䠍
ᾄ
≤≵≕≓≓≓≶≹
≋″≌
≤≵≕≓≓≓≰≹
≋″≌
‒
‡‒≤≵≕≓≓≓≫≹
≋″≌
4'#55'/$.;
Apply ‘‘LOBSTER’’ brand jaw lube (sold separately)
to the backs of the jaws.
ᵬᵭᵲᵣᵘ
Reassemble by following the disassembly procedure in
reverse. Tighten the jaw case head fully, and them turn
it back so that the notch is aligned with the tab on the
jaw case collar, and move the collar into place.
Reassemble by following the disassembly procedure
in reverse. Install the jaw case so that its distance
matches those shown in the illustration at right.
It will be easier to install the guide pipe if you turn
the pipe while inserting it.
≤≵≕≓≓≓≰≹
≋″≌
≤≵≕≓≓≓≫≹
≋″≌
≟ ‼⁓‒⁕⁓⁗‒⁗⁛⁙‒⁛⁛ ≡
61
81
≤≵≕≓≓≓≶≹
≋″≌
≟ ‼⁓‒⁕⁓⁗‒⁗⁛⁙‒⁛⁛ ≡
Align the
notch
Lower the jaw case collar
Apply jaw lube
(lubricating oil)
61
ᒍᛖᾔ
ᾝ
ᾖ
ᾛᾘ
ᾢ
ᾗ
11
● When re-assembling, be sure to apply a lubricant
such as grease to all moving and sliding parts.
● Be careful not to leave out any parts, and tighten
all connections securely.
● The jaws are consumable parts, and they should
be replaced periodically.
● In the case of the AR2000MV
(A)
and AR2000HV
(A)
,
the jaw case and jaw case lock nut do not need to
be removed during maintenance. If they are
removed by mistake, replace them so that the
distance matches those shown in the illustration
at right.
