After long periods of use, debris from rivet mandrel and other foreign materials tend to build up in
various parts of the tool and the hydraulic oil level may drop, both of which can lead to operating
problems. The tool should be cleaned periodically.
䖂㻌
With debris builds up, the jaws will not move smoothly and normal operation will not be possible.
䖂㻌
The jaws should be cleaned on average once every 3,000 riveting operations.
䠍
ᾃ
䠍
ᾂ
䠍
ᾁ
䠍
ᾀ
ᵨᵿᶕᴾᶋᵿᶇᶌᶒᶃᶌᵿᶌᶁᶃ
ᾀ
ᵟᶊᶑᶍᴾᶐᶃᶄᶃᶐᴾᶒᶍᴾᶒᶆᶇᶑᴾᶑᶃᶁᶒᶇᶍᶌᴾᶕᶆᶃᶌᴾᶐᶃᶎᶊᵿᶁᶇᶌᶅᴾᶎᵿᶐᶒᶑᵌ
≤≵≕≓≓≓≶≹
≋″≌
≤≵≕≓≓≓≰≹
≋″≌
‒
‡‒≤≵≕≓≓≓≫≹
≋″≌
‿″※⁀⁆‷⁀″⁀‵‷
ᵲᶓᶐᶌᴾᶍᶄᶄᴾᶒᶆᶃᴾᵿᶇᶐᴾᶑᶓᶎᶎᶊᶗᵌ
ᵳᶑᶃᴾᵿᴾᶑᶎᵿᶌᶌᶃᶐᴾᶍᶐᴾᶑᶇᶋᶇᶊᵿᶐᴾᶒᶍᶍᶊᴾᶒᶍᴾᶐᶃᶋᶍᶔᶃᴾ
ᶒᶆᶃᴾᶄᶐᵿᶋᶃᴾᶆᶃᵿᶂᵌ
ᵳᶑᶃᴾᵿᴾᶀᶐᶓᶑᶆᴾᶍᶐᴾᶑᶇᶋᶇᶊᵿᶐᴾᶒᶍᴾᶁᶊᶃᵿᶌᴾᵿᶊᶊᴾᶎᵿᶐᶒᶑᵌ
㻌
&+5#55'/$.;
ᵧᶌᴾᶁᵿᶑᶃᴾᶗᶍᶓᴾᶆᵿᶔᶃᴾᶑᶍᶋᶃᴾᶒᶐᶍᶓᶀᶊᶃᴾᵿᶌᶂᴾᶄᵿᶇᶊᶓᶐᶃᵊᴾᶎᶊᶃᵿᶑᶃᴾᶐᶃᶄᶃᶐᴾ
‘‘
ᵲᶐᶍᶓᶀᶊᶃᶑᶆᶍᶍᶒᶇᶌᶅ
’’
ᴾᶇᶌᴾᶒᶆᶃ
ᵧᶌᶑᶒᶐᶓᶁᶒᶇᶍᶌᴾᵫᵿᶌᶓᵿᶊᵌ
%.'#0+0)
Use a spanner or similar tool to loosen and
remove the jaw case, and then remove the
jew pusher spring, jaw pusher and jaws.
Pull backwards the jaw case collar to loosen and
remove the jaw case head, and then remove the
jaw pusher spring, jaw pusher, O-ring and jaws.
⚠
ᵵᵟᵰᵬᵧᵬᵥ
⚠
ᵡᵟᵳᵲᵧᵭᵬᵏᴾᵆᵮᵌᵑᵇ
⚠
ᵡᵟᵳᵲᵧᵭᵬᵐᴾᵆᵮᵌᵑᵇ
Jaw case collar
Jaw case head
Jaw
pusher
Jaw
case
Jaws
Jaw
pusher
spring
Jaw case
lock nut
≤≵≕≓≓≓≶≹
≋″≌
Guide pipe
Lock
washer
≤≵≕≓≓≓≰≹
≋″≌‒
‡‒≤≵≕≓≓≓≫≹
≋″≌
Jaw
pusher
spring
Jaw
pusher
Jaws Jaw
case
head
O-ring P-10(
䠆
)
䠆
O-ring is included only in AR2000MV
(A)
.
Guide pipe
ᒍᛖᾔ
ᾝ
ᾖ
ᾛᾘ
ᾢ
ᾗ
10
If the guide pipe is hard to
pull out during removal, use
long nose pliers or a similar
tool to pull it out.
