background image

INSTRUCTIONS FOR

PETROL ENGINE SETTING/LOCKING SET - 

HONDA 1.6, 1.8, 2.0, 2.2, 3.0 S.O.H.C/TWIN CAMS

- BELT DRIVE

MODEL NO: 

VS4656

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

       

1.  SAFETY

 

R

 

WARNING!

 Wear approved eye protection. Wear appropriate Personal Protective Equipment. A full range of Personal Protective 

Equipment is available from your Sealey dealer.

 

R

 

WARNING!

 Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to when 

using tools.

 

 

DO NOT

 use tools if damaged.

 

 Maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.

 

 Ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands. 

 

DO NOT

 attempt to start or move a vehicle whilst in gear and with timing devices fitted. 

 

 Wear suitable clothing to avoid snagging. 

DO NOT

 wear jewellery. Tie back long hair. 

 

 Account for all tools, parts and components being used. 

DO NOT

 leave these in or near the engine. Return tools to suitable storage 

after use.

 

 When not in use, store in a safe, dry childproof place.

 

 Keep children and unauthorised persons away from the work area.

 

V

 

IMPORTANT

! These instructions are provided as a guide only. Always refer to the vehicle manufacturer’s service instructions

           or a proprietary manual to establish the correct procedure and data. 

 

R

 

WARNING!

 The warnings, cautions and instructions in this manual cannot cover all possible conditions and situations. The Operator / 

user must apply caution and common sense (good practical sense).

 

 When timing an engine, always prevent the engine from being turned over. Use a notice and / or inhibit the engine.

 

R

 

WARNING!

 Incorrect or out of phase camshaft timing can result in contact between the valve head and the piston crown. This will 

cause damage to the engine.

2.  INTRODUCTION

Kit provides the special tools required when replacing the timing belts on Honda engines. Includes tensioner tools and locking pins.

Refer to 

instruction 

manual

Wear eye 

protection

VS4656 | Issue 4(SP) 16/06/16

Original Language Version

© Jack Sealey Limited

Отзывы: