LOAD KING 35-127 M, Руководство оператора

Страница: 111 / 216

111
Initiating Operation
1� If possible, position the unit at the job site in such a manner as to assure all work operations can be
performed without repositioning the truck (see Work Site Position on page 99 )� However, strict
observance of load weight, radius and maximum load rating must always be complied with�
2� Set parking brake securely�
3� Place transmission in neutral and engage PTO�
4� Extend all outriggers to make firm contact with ground� (See Outrigger Positioning on page 98 �)
Provide outrigger pads if terrain is soft or if outriggers tend to sink into ground� Properly level the
machine using the console mounted bubble level�
IF UNIT IS EQUIPPED WITH OPTIONAL FRONT BUMPER MOUNTED
STABILIZER, IT MUST BE EXTENDED LAST TO PREVENT STRUCTURAL
DAMAGE�
While operating the crane, frequently check that proper level condition is maintained�
NOTE:
Console mounted bubble levels must be periodically checked for proper adjustment.
See Maintenance manual for more information.
5� Position yourself at the operator’s console and accelerate the truck engine to desired speed�
Maximum pump speed should not exceed 2,300 R�P�M�
6� Bring the hydraulic oil up to operating temperature� (See Cold Weather Operation on page 100 �)
7� Check all controls for proper operation� During all operations, the controls should be metered to
prevent sudden starting and stopping�
FAILURE TO METER YOUR CONTROLS INDUCES HIGH SHOCK LOADS ON
THE EQUIPMENT WHICH MAY RESULT IN STRUCTURAL FAILURE OR
OVERTURNING OF THE CRANE�
DEATH OR SERIOUS INJURY MAY RESULT�