background image

 

About this manual 

 

Grinding Machine SBM-L 1000+1500 G1S2 ALU MIX 

1.3 

Presentation of warnings 

In this operating manual warnings are presented according to the following 
examples: 

 

 

 SIGNAL WORD! 

 

Type and source of danger 

Consequences of non-compliance 

  Actions to avert the danger. 

 

 

The signal word next to the danger symbol indicates the degree of danger. 

DANGER 

This signal word signifies an extremely dangerous situation. If the situation is 
not avoided, fatal or serious injuries will result. 

 

WARNING 

This signal word signifies a dangerous situation. If the situation is not 
avoided, fatal or serious injuries will result. 

 

CAUTION 

This signal word signifies a dangerous situation. If the situation is not 
avoided, medium to slight injuries will result.  

 

NOTE 

This signal word signifies a situation which presents risks to objects. If the 
situation is not avoided, property damage will result. The signal word is 
present without a danger symbol. 

 

 

1.4 Additional 

representations 

In this operating manual important information is presented according to the 
following examples: 

 

 

Import information is denoted by »i«. 

 

 

Texts, which request action, are marked by a triangle (

). The immediate 

effect of this action is marked as result (

). 

 

 

The positions s of the figures are marked by numbers in parentheses (

1

). 

 

Requests and 

results 

Position numbers 

Содержание SBM-L 1000 G1S2 ALU MIX



















































































Отзывы: