Lissmac SBM-L 1000 G1S2 ALU MIX, Руководство по эксплуатации

Страница: 50 / 82

Changing abrasives
Grinding Machine SBM-L 1000+1500 G1S2 ALU MIX 50
6 Changing abrasives
WARNING
Accidental starting of the grinding motors during replacement of
abrasives
Severe injuries due to rotating grinding belts.

Turn off the main switch each time the S-unit or the the G-unit is moved.

Only entrust the work to authorised personnel.
6.1 Replacing G units grinding belts
6.1.1 Removing upper and lower G units grinding belt
The upper and lower G units must be moved completely into their end
positions to change the grinding belts.
For the upper G unit the sheet thickness must additionally be moved to
"zero" (see display).
Changing the grinding belt is shown on the upper G unit. Changing the
grinding belt in the lower G unit is identical.
Abb. 41: Changing the grinding belt of the upper G unit
1 Belt roller
2 Tensioning lever

Set sheet thickness to "zero".

Move the upper G unit upward into the end position (Chapter 5.3.9.1
Fig.30).

Turn off the machine (main switch).

Move the tensioning lever (2) to the left and loosen the grinding belt.

Remove the grinding belt.