Lissmac SBM-L 1000 G1S2 ALU MIX, Руководство по эксплуатации, Страница: 25 / 82

Product description
Grinding Machine SBM-L 1000+1500 G1S2 ALU MIX 25
3.7 Function
There are two machining units built into the grinding machine each in
different designs. The front grinding units (3) and (4) remove splatter on the
plate surface. The rear grinding units (1) and (6) are each equipped with two
abrasive belts that travel in opposite directions. They are suitable for the
edge rounding (deburring) of workpieces cut by punching, laser, or fine
plasma. The grinding units are installed on both top and bottom. In this way
the workpieces can be processed on both sides in one work step.
In the machine, workpieces are brought under the feed roller on the
conveyor belt (5) and transported between the machining units.
The machining units can be positioned, along with the feed roller (2), using
the sheet thickness adjustment. The machining units can also be positioned
individually for the single-sided processing of workpieces. Each machining
unit can also be positioned individually for maintenance, adjustment, and
optimisation of processing.
Abb. 9: Functional elements of the SBM-L 1000+1500 G1S2 ALU MIX
1 Edge rounding unit, top
2 Feed rollers
3 Upper grinding unit
4 Lower grinding unit
5 Conveyor belt
6 Edge rounding unit, bottom
To exchange the abrasive belts and grinding belts (tool change) move the
upper and lower machining units completely apart.
Material thickness
and positioning of
machining units
Abrasive belts
Grinding belts