Lissmac SBM-L 1000 G1S2 ALU MIX, Руководство по эксплуатации

Страница: 46 / 82

Operation
Grinding Machine SBM-L 1000+1500 G1S2 ALU MIX 46
5.3.11 Starting the machine
Before starting the machine, the following conditions must be checked:

Acceptance of the workpieces at the output side of the machine is
ensured.

Contamination such as material residue and dust deposits are removed.

All abrasive belts and grinding belts are checked for damage (visual
inspection).

Place the main switch on the back of the machine into the "On" position.

Make sure that all malfunctions are corrected.

Ensure that both »EMERGENCY STOP« buttons are disengaged.
Abb. 38: Starting the machine
1 ON/OFF switch
Start the machine using the ON/OFF switch.
Before grinding can begin, the following pre-requisites must be met:

The sheet thickness of the workpiece is measured and set on the
machine (see Chapter 5.3.6)

Feed speed is set (see Chapter 5.2.3).

Top and bottom machining units are correctly positioned