www.lionprecision.com/two-year-warranty/
Document No. M017-7500.004
21
Oakdale, MN, USA www.lionprecision.com 651-484-6544
Select a Machine (Machine Manager)
SpindleCheck Inspector contains a database of machines/spindles and their measurements,
because some machines have multiple spindles, the machine AND spindle must be identified. No
measurement can be made unless a specific machine and spindle have been selected. The
following data is required for each machine:
•
Company: The company who owns the machine
•
Machine ID: A unique identifier for the machine within the company. This is often taken from
an asset tag or similar identifier. No two machines from the same company can have the
same Machine ID.
•
Machine Type:
▪
Vertical Machining Center
▪
Horizontal Machining Center
▪
Turning Center
▪
Sliding Head Machine (Swiss)
▪
Multi-Task Machine
▪
Lathe
•
Spindle Name: Identify the spindle to be measured
•
Spindle Type: Milling or Turning. Measurement values within SpindleCheck Inspector are
calculated differently depending on the spindle type.
If Company, Machine ID, Machine Type, Spindle Name, and Spindle Type are not
loaded properly the new machine will not save.
Additionally, other information such as the machine’s specific location can also be included in the
machine description.
NOTE
