www.lionprecision.com/two-year-warranty/
Document No. M017-7500.004
17
Oakdale, MN, USA www.lionprecision.com 651-484-6544
4. >… Select “Home network” and it might need a few minutes to setup.
5. When the WiFi is successfully connected, the Network or icon will show like this
.
Change wireless SSID and Password please refer to Settings > Wireless
Launch SpindleCheck Inspector
When the SpindleCheck Inspector is launched (Start > SpindleCheck Inspector ) it will try to
connect to a SpindleCheck device. If it is successful, the Home Screen will be displayed. If it
does not find a connection to a SpindleCheck device, you will be given the option to Retry the
connection, or to View Data previously collected.
“Retry”
1. Confirm the SpindleCheck device is turned on and its Not Ready light is off.
2. Confirm that the computer is connected to the SpindleCheck wireless network or connected
by USB cable.
3. Then Retry.
Home Screen
The Home Screen of SpindleCheck Inspector contains eight buttons to access different functions.
When first launched, some of the buttons will be grayed out as they have no function until a
particular machine is specified. When a machine has been loaded, the machine description will
be listed in the top right corner next to the Lion Precision logo. If you are going to measure a
machine, the first step is loading a machine in the Machine Manager.
Option B – Connect through USB
1. Plug in the USB cable – TypeB to SpindleCheck Inspector and
the other end USB – TypeA to the host computer.
2. This might take a few minutes for the computer to recognize
and install the driver.
3. Check to see if a device name called “Microsoft Windows
Mobile Remote Adapter #xx” or “CompactFlex” is active.
