Linksys WRT54G3G - Wireless-G Router For Verizon Wireless Broadband Скачать руководство пользователя | Manualshive

Страница: 65 / 145

background image

55

Chapter 6: Configuring the Wireless-G Router for 3G/UMTS Broadband
The Setup Tab - Basic Setup

Wireless-G Router for 3G/UMTS Broadband

•

Static IP

. If you are required to use a permanent IP address to connect to the Internet, select

Static IP

.

Internet IP Address. This is the Router’s IP address, when seen from the Internet. Your ISP will provide you
with the IP Address you need to specify here.

Subnet Mask. This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP
will provide you with the Subnet Mask.

Gateway. Your ISP will provide you with the Gateway Address, which is the ISP server’s IP address.

DNS. Your ISP will provide you with at least one DNS (Domain Name System) Server IP Address.

•

PPPoE

. Some DSL-based ISPs use PPPoE (Point-to-Point Protocol over Ethernet) to establish Internet

connections. If you are connected to the Internet through a DSL line, check with your ISP to see if they use
PPPoE. If they do, you will have to enable

PPPoE

.

User Name and Password. Enter the User Name and Password provided by your ISP.

Connect on Demand: Max Idle Time. You can configure the Router to cut the Internet connection after it has
been inactive for a specified period of time (Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the Router to automatically re-establish your connection as
soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio
button. In the

Max Idle Time

field, enter the number of minutes you want to have elapsed before your Internet

connection terminates.

Keep Alive Option: Redial Period. If you select this option, the Router will periodically check your Internet
connection. If you are disconnected, then the Router will automatically re-establish your connection. To use
this option, click the radio button next to

Keep Alive

. In the

Redial Period

field, you specify how often you want

the Router to check the Internet connection. The default Redial Period is

30

seconds.

•

PPTP

. Point-to-Point Tunneling Protocol (

PPTP

) is a service that applies to connections in Europe only.

Internet IP Address. This is the Router’s IP address, as seen from the Internet. Your ISP will provide you with
the IP Address you need to specify here.

Subnet Mask. This is the Router’s Subnet Mask, as seen by users on the Internet (including your ISP). Your ISP
will provide you with the Subnet Mask.

Gateway. Your ISP will provide you with the Gateway Address.

User Name and Password. Enter the User Name and Password provided by your ISP.

Figure 8-4: Static IP Connection Type

Static IP address

: a fixed address

assigned to a computer or device
connected to a network.

Figure 8-5: PPPoE Connection Type

Figure 8-6: PPTP Connection Type

«
...
63
64
65
66
67
...
»

Содержание WRT54G3G - Wireless-G Router For Verizon Wireless Broadband


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для WRT54G3G - Wireless-G Router For Verizon Wireless Broadband

Patton SmartNode 2300 Series

Бренд: Patton electronics Страницы: 2

Бренд: Paradyne Страницы: 12

RUGGEDSWITCH RS900G

Бренд: RuggedCom Страницы: 23

Бренд: HARTING Страницы: 13

Бренд: E-LINX Страницы: 24

Бренд: Z-Wave Страницы: 6

Бренд: Galaxy Страницы: 30

ApplianceStor 15MT

Бренд: Rasilient Страницы: 30

OptiBond 210 C Series

Бренд: i-MO Страницы: 16

Бренд: Xantech Страницы: 6

Бренд: Multi-Link Страницы: 31

Бренд: MicroNova Страницы: 113

Бренд: ST Страницы: 37

Бренд: TRENDnet Страницы: 3

Бренд: Lancom Страницы: 79

TS-U100 - NAS Server - USB

Бренд: TRENDnet Страницы: 47

Бренд: Niveo Professional Страницы: 49

GigaSpire BLAST u6

Бренд: Calix Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды