Linksys WRT54G3G - Wireless-G Router For Verizon Wireless Broadband Скачать руководство пользователя | Manualshive

Страница: 104 / 145

background image

94

Appendix A: Troubleshooting
Frequently Asked Questions

Wireless-G Router for 3G/UMTS Broadband

Frequently Asked Questions

What is the maximum number of IP addresses that the Router will support?

The Router will support up to 253 IP addresses.

Is IPSec Pass-Through supported by the Router?

Yes, it is a built-in feature that the Router automatically enables.

Where is the Router installed on the network?

In a typical environment, the Router is installed between the cable/DSL modem and the LAN. Plug the Router into
the cable/DSL modem’s Ethernet port.

Does the Router support IPX or AppleTalk?

No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications.
IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk,
a communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but
those protocols cannot connect from the Internet to a LAN.

Does the Internet connection of the Router support 100Mbps Ethernet?

The Router’s current hardware design supports up to 100Mbps Ethernet on its Internet port; however, the Internet
connection speed will vary depending on the speed of your broadband connection. The Router also supports
100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Router.

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that
is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is
never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet
accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may
have many private addresses behind this single address provided by the ISP.

Does the Router support any operating system other than Windows 98SE, Windows Millennium,
Windows 2000, or Windows XP?

Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of
any non-Windows operating systems.

Does the Router support ICQ send file?

Yes, with the following fix: click ICQ menu -> preference -> connections tab->, and check I am behind a firewall
or proxy. Then set the firewall time-out to 80 seconds in the firewall setting. The Internet user can then send a file
to a user behind the Router.

«
...
102
103
104
105
106
...
»

Содержание WRT54G3G - Wireless-G Router For Verizon Wireless Broadband


















































































































































Отзывы:

Нет отзывов

Похожие инструкции для WRT54G3G - Wireless-G Router For Verizon Wireless Broadband

Бренд: ZyXEL Communications Страницы: 125

Бренд: Magnadyne Страницы: 8

Бренд: B&B Electronics Страницы: 2

Бренд: TP-Link Страницы: 131

Бренд: Tripp Lite Страницы: 2

Бренд: HMS Страницы: 18

IE-SW-VL09T-6TX-3SC

Бренд: Weidmuller Страницы: 14

Бренд: Manson Engineering Industrial Страницы: 10

TeraStation WSS WS5020N6

Бренд: Buffalo Страницы: 115

Бренд: Acces Страницы: 21

Бренд: Hame Страницы: 37

X-Pedition XSR-1850

Бренд: Enterasys Страницы: 114

Бренд: Linksys Страницы: 2

Бренд: Lanpro Страницы: 3

TEG-S16R - DATA SHEETS

Бренд: TRENDnet Страницы: 12

Бренд: Valcom Страницы: 3

OfficeConnect 3CXSH654B

Бренд: 3Com Страницы: 52

Бренд: Inter-m Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды