Chapter 3
Advanced Configuration
15
Wireless-G Broadband Router with 2 Phone Ports
“Wi-Fi Protected Setup” section. To manually configure
your wireless network, select
Manual
. Proceed to the
“Wireless Network” section.
NOTE:
Wi-Fi Protected Setup is available
for
your
primary
wireless
network
(SSID1) only. To configure your second
wireless network (SSID2), select
Manual
.
If you are unable to configure the second wireless
network, contact your service provider for more
information (these settings may be controlled by
your service provider).
Wi-Fi Protected Setup
There are three methods available. Use the method that
applies to the client device you are configuring.
Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)
Wi-Fi Protected Setup > Congratulations
NOTE:
Wi-Fi Protected Setup configures one
client device at a time. Repeat the instructions
for each client device that supports Wi-Fi
Protected Setup.
Method #1
Use this method if your client device has a Wi-Fi Protected
Setup button.
Click or press the
1.
Wi-Fi Protected Setup
button on
the client device.
Click the
2.
Wi-Fi Protected Setup
button on this
screen.
After the client device has been configured, click
3.
OK
. Then refer back to your client device or its
documentation for further instructions.
Method #2
Use this method if your client device has a Wi-Fi Protected
Setup PIN number.
Enter the PIN number in the
1.
field on this screen.
Click
2.
Register
.
After the client device has been configured, click
3.
OK
. Then refer back to your client device or its
documentation for further instructions.
Method #3
Use this method if your client device asks for the Router’s
PIN number.