Chapter 3
Advanced Configuration
18
Wireless-G Broadband Router with 2 Phone Ports
Security Mode > WPA2 Enterprise
WPA Algorithms
WPA2 supports two encryption
methods, TKIP and AES, with dynamic encryption keys.
Select the type of algorithm,
AES
or
TKIP + AES
. The
default is
TKIP + AES
.
RADIUS Server Address
Enter the IP address of the
RADIUS server.
RADIUS Port
Enter the port number of the RADIUS
server. The default value is
1812
.
Shared Key
Enter the key shared between the Router
and the server.
Key Renewal Timeout
Enter a Key Renewal Timeout
period, which instructs the Router how often it should
change the encryption keys. The default is
3600
seconds.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Security Mode > WEP
Encryption
Select a level of WEP encryption,
64 bits 10
hex digits
or
128 bits 26 hex digits
. The default is
64 bits
10 hex digits
.
Passphrase
Enter a Passphrase to automatically generate
WEP keys. Then click
Generate
.
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually.
TX Key
Select which TX (Transmit) Key to use. The default
is
1
.
Click
Save Settings
to apply your changes, or click
Cancel
Changes
to cancel your changes.
Wireless > Wireless MAC Filter
Wireless access can be filtered by using the MAC addresses of
the wireless devices transmitting within your network’s radius.
Wireless > Wireless MAC Filter
Wireless MAC Filter
Select a SSID
Select the appropriate SSID. (If you enabled
the second wireless network on the
Basic Wireless Settings
screen, then set up wireless MAC filtering for each SSID.)
Wireless MAC Filter
To filter wireless users by MAC address,
either permitting or blocking access, select
Enabled
. If you
do not wish to filter users by MAC address, keep the default
setting,
Disabled
.
Access Restriction
Prevent
Select this
to block wireless access by MAC
address. This button is selected by default.
Permit
Select this to allow wireless access by MAC
address. This button is not selected by default.
