79
Chapter 6: Setting up and Configuring the Router
Wizard Tab
10/100 16-Port VPN Router
4. The screen shown in Figure 6-114 will appear. Select the service you want from the
Service
pull-down menu.
Click the
Next
button to continue. Click the
Previous
button if you want to return to the previous screen. Click
the
Exit
button if you want to exit the Access Rule Setup Wizard.
5. The screen shown in Figure 6-115 will appear. For this service, you can select whether or not you want the
Router to keep a log tracking this type of activity. To keep a log, select
Log packets matching this access
rule
. If you don’t want a log, select
Do not log packets matching this access rule
. Click the
Next
button to
continue. Click the
Previous
button if you want to return to the previous screen. Click the
Exit
button if you
want to exit the Access Rule Setup Wizard.
6. The screen shown in Figure 6-116 will appear. Select the appropriate Source Interface (LAN, DMZ, Any, WAN1,
WAN2...) from the
Ethernet
pull-down menu.
Select the Source IP address(es) for this Access Rule. If it can be any IP address, select
Any
. If it is one IP
address, select
Single
and enter the IP address in the
Source IP
fields. If it is a range of IP addresses, select
Range
, and enter the IP addresses in the
Source IP
fields. Click the
Next
button to continue. Click the
Previous
button if you want to return to the previous screen. Click the
Exit
button if you want to exit the
Access Rule Setup Wizard.
Figure 6-114: Service
Figure 6-115: Log
Figure 6-116: Source