48
Chapter 6: Setting up and Configuring the Router
Firewall Tab - Access Rules
10/100 16-Port VPN Router
Add a New Rule
Services. If you need help to set up the Access Rules, click the
Wizard
button. For more details, see the Wizard
Tab section. Otherwise, follow these instructions:
1. For the Action setting, select
Allow
or
Deny
from the pull-down menu, depending on the purpose of the
Access Rule.
2. Select the service you want from the
Service
pull-down menu. If the Service you need is not listed in the
menu, click the
Service Management
button to add the new service. A new screen will appear. Enter a name
in the
Service Name
field. From the
Protocol
drop-down menu, select the protocol it uses. Enter its range in
the
Port Range
fields. Click the
Add to List
button. Then, click the
Save Setting
button to save your changes.
Click the
Cancel Changes
button to cancel your changes. Click the
Exit
button to return to the
Add a New
Access Rule
screen.
If you want to modify a service you have created, select it and click the
Update this service
button. Then,
click the
Save Setting
button to save your changes. Click the
Exit
button to return to the
Add a New Access
Rule
screen.
If you want to delete a service you have created, select it and click the
Delete selected service
button. Then,
click the
Save Setting
button to save your changes. Click the
Exit
button to return to the
Add a New Access
Rule
screen.
If you want to add another service, click the
Add New
button. Enter a name in the
Service Name
field. From
the
Protocol
drop-down menu, select the protocol it uses. Enter its range in the
Port Range
fields. Click the
Add to List
button. Then, click the
Save Setting
button to save your changes. Click the
Cancel Changes
button to cancel your changes. Click the
Exit
button to return to the
Add a New Access Rule
screen.
3. For this service, you can decide whether or not you want the Router to keep a log tracking this type of activity.
To keep a log, select
Log packets matching this access rule
. If you don’t want a log, select
Do not log
packets matching this access rule
.
4. Select the appropriate Source Interface (LAN, DMZ, Any, WAN1, WAN2...) from the pull-down menu. (The WAN
ports available depend on the number of WAN ports set on the
Network
or
Port Management
screen.)
5. Select the Source IP address(es) for this Access Rule. If it can be any IP address, select
Any
. If it is one IP
address, select
Single
and enter the IP address in the
Source IP
fields. If it is a range of IP addresses, select
Range
, and enter the IP addresses in the
Source IP
fields.
Figure 6-45: Add a New Access Rule