![background image](http://html1.mh-extra.com/html/linksys/rv016/rv016_user-manual_1924685100.webp)
89
Appendix A: Troubleshooting
Common Problems and Solutions
10/100 16-Port VPN Router
“Appendix C: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an
IP address. Then check the
Enable
checkbox for the entry. Consider the examples below:
D. Click the
Add to List
button, and configure as many entries as you like.
When you have completed the configuration, click the
Save Settings
button.
11. I can’t get the Internet game, server, or application to work.
If you are having difficulties getting any Internet game, server, or application to function properly, consider
exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an
application requires too many ports or when you are not sure which port services to use. Make sure you
disable all the forwarding entries if you want to successfully use DMZ hosting, since forwarding has priority
over DMZ hosting. (In other words, data that enters the Router will be checked first by the forwarding
settings. If the port number that the data enters from does not have port forwarding, then the Router will send
the data to whichever PC or network device you set for DMZ hosting.) Follow these steps to set DMZ hosting:
A. Access the Router’s Web-based Utility by going to
http://192.168.1.1
or the IP address of the Router. Go
to the
Setup
=>
Forwarding
tab.
B. Disable or remove the entries you have entered for forwarding. To delete an entry, select it and then click
the
Delete selected application
button. Keep this information in case you want to use it at a later time.
C. Click the
DMZ Host
tab.
D. Enter the Ethernet adapter’s IP address of the computer you want exposed to the Internet. This will
bypass the NAT security for that computer. Please refer to “Appendix C: Finding the MAC Address and IP
Address for Your Ethernet Adapter” for details on getting an IP address.
Once completed with the configuration, click the
Save Settings
button.
12. I forgot my password, or the password prompt always appears when saving settings to the Router.
Reset the Router to factory defaults by pressing the Reset button for ten seconds and then releasing it. If you
are still getting prompted for a password when saving settings, then perform the following steps:
Application
Start and End
Protocol
IP Address
Enabled
UT
7777 to 27900
Both
192.168.1.100
X
Halflife
27015 to 27015
Both
192.168.1.105
X
PC Anywhere
5631 to 5631
UDP
192.168.1.102
X
VPN IPSEC
500 to 500
UDP
192.168.1.100
X