![background image](http://html1.mh-extra.com/html/linksys/rv016/rv016_user-manual_1924685029.webp)
18
Chapter 6: Setting up and Configuring the Router
Overview
10/100 16-Port VPN Router
Firewall Tab
•
General. Use this screen to enable or disable various firewall and security features, including SPI (Stateful
Packet Inspection), DoS (Denial of Service), and Remote Management.
•
Access Rules. Access Rules evaluate the network traffic's source IP address, destination IP address, and IP
protocol type to decide whether the IP traffic is allowed to pass through the firewall. You can set up custom
Access Rules from this screen.
•
Content Filter. This tab allows you to filter web access according to a list of forbidden domains and a
schedule.
VPN Tab
•
Summary. This screen displays the Summary, Tunnel Status, and GroupVPN Status settings and information.
•
Gateway to Gateway. Use this screen to create a new tunnel between two VPN devices.
•
Client to Gateway. From this screen, create a new tunnel between a local VPN device and a mobile user, or set
up a Group VPN.
•
VPN Pass Through. This tab allows you to disable IPSec, PPTP, and/or L2TP Pass Through.
Log Tab
•
System Log. The System Log displays the syslog, e-mail alert, and log settings.
•
System Statistics. This tab displays the system statistics.
Wizard Tab
•
Wizard. Use this tab to access two Setup Wizards, the Basic Setup Wizard and Access Rule Setup Wizard.
Support Tab
•
Support. Use this screen to conveniently access this User Guide and the Linksys website.
Logout Tab
•
Logout. Click the Logout tab to exit the Utility.