Linksys LRT214 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 77

background image

47

VPN

Linksys

47

VPN

VPN (Virtual Private Network) is a technology that enables two private networks
to establish a secure and encrypted connection across public network, such as
the Internet. VPN allows remote user, say a branch office or employee at home,
to access the company intranet and share files, video conference or access
servers, i.e., ERP or mail server.

The router provides several VPN protocols. You can choose which kinds of VPN
technology are most suitable for your network structure and using scenarios.

Summary

The Summary page features details on the current status of VPN tunnel. The
router supports up to 50 tunnels.

NOTE:

Summary information about PPTP only appears when you enable the PPTP
server.

Summary

Tunnel(s) Used:

The number of VPN tunnels in use.

Tunnels Available:

The total number of VPN tunnels the router will
support.

Detail:

Click Refresh to update the data, or click Close to
return to summary page.

Tunnel Status

Tunnel(s) Enabled:

How many tunnels are enabled by the administrator.

Tunnel(s) Defined:

How many tunnels are defined by the administrator:
enabled and disabled.

The table displays the following information about each tunnel:

No.:

Indicates the number of the tunnel.

Name:

VPN tunnel connection name, such as XXX OfficeGive the
tunnels different names to avoid confusion if you have more
than one tunnel connected.

Status:

Connected or Waiting for Connection.

Phase2
Encrypt/
Auth/Group:

Displays settings such as Encryption type (NULL/DES/3DES/
AES-128/AES-192/AES-256), Authentication method (NULL/
MD5/SHA1), and DH Group number (1/2/5)

If users select Manual setting for IPSec, Phase 2 DH group
will not display.

Local Group: Settings for local VPN connection secure group.
Remote
Group:

Settings for remote VPN connection secure group.

Remote
Gateway:

The IP address of the Remote Gateway.

Tunnel Test:

Click “Connect” to verify the tunnel status. The test result will
be updated. To disconnect, click “Disconnect” to stop the
VPN connection. To delete tunnel settings, select a tunnel,
and then click the Delete icon.

Config.:

Setting icons include Edit and Delete. Click on Edit to change
settings. Click Delete to remove all tunnel settings.

«
...
49
50
51
52
53
...
»

Содержание LRT214














































































Отзывы:

Нет отзывов

Похожие инструкции для LRT214

Бренд: D-Link Страницы: 15

DSN-4100 Series

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 2

UR5i v2 Libratum

Бренд: B+B SmartWorx Страницы: 8

Бренд: B+B SmartWorx Страницы: 8

Бренд: FOR-A Страницы: 72

Бренд: Tripp Lite Страницы: 3

LonWorks Communication Module LN-01

Бренд: Delta Electronics Страницы: 1

3C8567 - SuperStack II NETBuilder SI 567...

Бренд: 3Com Страницы: 6

Elinx EIR510 Series

Бренд: B&B Electronics Страницы: 2

Бренд: Casablanca Страницы: 13

Бренд: 3Com Страницы: 12

CyberSWITCH CSX101

Бренд: Cabletron Systems Страницы: 72

Бренд: B+B SmartWorx Страницы: 50

Бренд: Cradlepoint Страницы: 2

DotSurfer GPC-2100

Бренд: Gtran Wireless Страницы: 44

Бренд: TRENDnet Страницы: 7

DGN2200M - Wireless-N 300 Router

Бренд: NETGEAR Страницы: 95

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды