Linksys LRT214 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 77

background image

71

Maintenance

Linksys

Firmware Upgrade

Users may directly upgrade the device firmware on the Firmware Upgrade
page. First download the firmware file from Linksys.com. Go to Maintenance >
Firmware Upgrade. Please confirm all information about the software version
in advance. Select and browse the software file, click Firmware Upgrade button
to complete the upgrade of the designated file.

NOTE:

1.

When choosing previous firmware versions, all settings will be restored
back to default.

2.

Upgrading firmware may take a few minutes, so please don’t turn off the
power or press the reset button.

3.

Please don’t close the window or disconnect the link during the upgrade
process.

Restart

Go to Maintenance > Restart.

Click Restart Router to reboot the router, and then click OK to continue or click
Cancel to abandon.

Backup and Restore

Go to Maintenance > Backup and Restore page. You can export the current
configuration or restore existing backup settings here. You can back up two
kinds of configuration files: the startup and the mirror configuration. The router
will load the startup configuration file when it boots up, and copy the startup
file to the mirror configuration. If the startup configuration file fails, the mirror
configuration file will be adopted.

NOTE:

If the router operates for 24 hours without reboot or configuration changed,
the startup configuration will be copied to mirror configuration automatically.

Restore Startup Configuration

You can import an existing configuration file (.config) to the router. Click
Browse in the Restore Startup Configuration section and find the file, and then
click Restore to import the configuration.

Backup Configuration File

You can export your startup and mirror configuration files to your computer.
If needed, you can use these files to restore the settings. Click Backup Startup
Configuration or Backup Mirror Configuration. The default filenames will be
Startup.config or Mirror.config. You can change the filenames if you wish.

Copy Configuration File

You can copy your startup configuration file to your mirror configuration file or
copy mirror to your startup configuration manually.

NOTE:

Make a current configuration file before doing this action so that you can
return to the current configuration if not satisfied with the startup or mirror
configuration file.

«
...
73
74
75
76
77
»

Содержание LRT214














































































Отзывы:

Нет отзывов

Похожие инструкции для LRT214

Бренд: TC Electronic Страницы: 174

Бренд: Valcom Страницы: 3

Бренд: Valcom Страницы: 4

Бренд: X-Micro Страницы: 74

Бренд: Kohler Страницы: 32

Бренд: ZyXEL Communications Страницы: 2

RoteFinder RF500S

Бренд: Multi-Tech Страницы: 134

ELITE LCD UPGRADE KIT

Бренд: Corsair Страницы: 11

Бренд: Aztech Страницы: 13

Application Module 9109 OCU-DP

Бренд: Paradyne Страницы: 8

AN5506-04 Series

Бренд: FiberHome Страницы: 146

Бренд: Tachosys Страницы: 15

Бренд: EnGenius Страницы: 6

Бренд: D-Link Страницы: 141

Бренд: D-Link Страницы: 72

Бренд: Tripp Lite Страницы: 2

Бренд: Cisco Страницы: 30

Бренд: Cisco Страницы: 76

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды